====== Clish ======
Voici un petit mémo sur des commandes clish qui peuvent être utiles :

#setting default gateway\\
set static-route default nexthop gateway address 192.168.29.2 priority 1 on

#adding static routes\\
set static-route 172.23.124.150/32 nexthop gateway address 192.168.29.50 on

#Add proxy arp\\
add arpproxy address 192.168.29.56 macaddress 0:a0:8e:7d:13:d0\\
add arpproxy address 192.168.29.57 macaddress 0:a0:8e:7d:13:d0

#Add an interface\\
set interface eth1 speed 100M duplex full active on\\
add interface eth1c0 address 192.168.29.54/24 enable

#VRRP\\
set vrrp accept-connections on\\
set vrrp coldstart-delay 60

set vrrp interface eth1c0 monitored-circuit vrid 54 monitored-interface eth2c0 on\\
set vrrp interface eth1c0 monitored-circuit vrid 54 monitored-interface eth2c0 priority-delta 10\\
set vrrp interface eth1c0 monitored-circuit vrid 54 monitored-interface eth3c0 on\\
set vrrp interface eth1c0 monitored-circuit vrid 54 monitored-interface eth3c0 priority-delta 10\\
set vrrp interface eth1c0 monitored-circuit vrid 54 priority 100\\
set vrrp interface eth1c0 monitored-circuit vrid 54 hello-interval 1\\
set vrrp interface eth1c0 monitored-circuit vrid 54 vmac-mode default-vmac\\
set vrrp interface eth1c0 monitored-circuit vrid 54 backup-address 192.168.29.1 on

#Set ntp servers\\
add ntp server 10.1.1.2 version 3 prefer yes\\
add ntp server 10.1.1.1 version 3 prefer yes

#Setting Time zone\\
set date timezone-city "Greenwich (GMT)"

#Add hostname\\
set hostname testbox

#Add Host address assignments\\
add host name testbox ipv4 192.168.29.54